How to make a leather key chain?

A while ago, I got this awesome leather punch set van EviesToolEmporium as part of the Totally Tutorials Exchange program. The only thing I needed to do in exchange of receiving this set is to make a tutorial.
I did a tutorial with the leather punch set already and posted it on Poppytalk Handmade.This tutorial will be a bit similar but I'll show you how to use the leather punch in combination with the eyelet punch.

Here is what you need:
A leather & eyelet punch set, leather, pencil, paper,
thin metal wire, thread, black marker.
Make a drawing onto paper.
Trace it onto the leather.
Punch the holes with a needle so that you know where to place holes.
Cut out the design.
Punch holes.
Place an eyelet into the hole.
Place the eyelet tool onto the eyelet and press firmly.
Glue the head onto the body.

Cut a piece of thread.
Place it into the eyelet hole and make a knot at the end.
Add legs
Cut a little piece of thin metal wire.
This is to help pull the thread through the tiny holes.
Pull the 'legs' through the wooden bead.
Make knots at the end.
Hang your design onto a key chain.

A large key chain is much easier to find back your keys when you need 'em I think... :)

How to make a polymer clay brooch or ring?

Through Totally Tutorials, I've 'met' Michelle from EviesToolEmporium and she has been sending me supplies in exchange for a tutorial.
I find it awesome 'cause I get to play with new toys a lot . :) Thank you, Michelle!
She send me a Diamond Burr set a while back and I thought it was about time I made a tutorial for it. Normally, the diamond burr pieces are used for engraving in glass or ceramics. I'm going to use 'em in plaster . I have a love/hate relationship with plaster. As a ceramicist it's impossible to avoid plaster as it just makes your life so much easier. So I've learned to live & work with it.

Here is what you need:
plaster, water, a container for making the plaster, clay,
polymer clay, a diamond burr set, a pencil, a dry paintbrush, plastic.

Make domed shapes with clay and make
sure they are as smooth as possible.

Built a little wall around the shapes with clay so you can poor plaster in it.
Make plaster and poor it over the domes. Let it set and dry for a few days.

When the moulds are dry, sand the sides a little bit so that it feels smooth.

Draw a little something in the mould with a pencil.

Engrave the lines with the diamond burrs and
use a round shaped burr to engrave the little dots.
Because the set has so many different burrs it's
ideal to use for engraving in plaster as there is always
a perfect one to use for the thing you want to engrave.

When it's done, wipe excess plaster away with a paintbrush.

Then take a piece of polymer clay and press it into the mould.

Take another piece of polymer clay to take the piece out of the mould.

If you don't like the result, you can still adjust
the engraving until your satisfied.
Fire the piece of polymer clay and glue a brooch pin or a ring on the back.

I use this technique for my clay and porcelain work. I love engraving in plaster and you can get really fine details with diamond burrs. Try it, you'll be amazed at the opportunities it will bring you! :)

Tutorial on Poppytalk Handmade

Today, one of my tutorials is published on Poppytalk Handmade. It's all about how to make an Easter decoration and use a leather punch tool.
Hop over here to find it. Enjoy!
If you leave a comment here, you'll have a chance to win the birdies I made for making the tutorial. :)

How to use a metal letter stamp set with clay?

In July, I saw the new exchange program on Totally Tutorials. The idea behind it is that suppliers offer supplies in exchange for a tutorial. As you all know, I love making tutorials & I love supplies so I didn't have to think twice. I applied for the nice set of 1.5mm letter/number stamps from Evie's Tool Emporium. They arrived very soon after she decided who was going to get them, but I was so busy preparing for the craft fairs that I didn't have much time to play around with them. Well, time has come to show you what I did with them...
I used polymer clay (Fimo) to create gift tags from them. I decided to try white and black and see what the results were.
Here is what you need:

Metal stamping letters/numbers set, polymer clay, acrylic paint, flat wooden sticks, ceramic tiles or glass, cookie cutters, rolling pin, embossing tool or fat needle, paper plate, paintbrush and a cloth.

Take a piece of polymer clay and soften it while kneading.

Put the flat wooden sticks on the ceramic tile (makes it easier to transfer to the oven) and roll with the rolling pin over the clay so that it's nice, flat and even.When you rolled out a piece, lift it up carefully and
transfer it to another tile so you can roll out more little clay slabs.

Punch with your cookie cutters, figures out of the polymer clay slab.

I made two sets in black and white clay.

Before you stat using your letter stamp set, wipe it off with a soft cloth. The stamps are a bit oily to make sure they don't start to rust.Before you start stamping, try your stamp on a sample of Polymer clay.
This way you know how hard you have to press the stamp to get result and it will also be good to see if you're not holding the stamp upside down.

Hold the metal stamptool as straight as possible and press lightly into the clay.

Here is what I stamped...

If you click on this picture below, you will see better what I stamped on the clay.

Take your embossing tool or needle to punch a hole in the clay.

Carefully take the piece of clay off the ceramic tile and punch with your embossingtool or needle on the backside of the clay so that the hole can be used.

Preheat your oven to 110°C or read the instructions on the packaging of the polymer clay you are using.

Put the ceramic tiles with the clay pieces in the oven for 30 minutes
and let it cool down afterwards. It's ready to use when they feel cold.

Put some acrylic paint on a paper plate and paint the sides and front of the clay.

Let it dry for a while.

When it's dry, rub it with a damp cloth
so that most of the paint will come off again.

The harder you rub, the more paint will come off.

Here is another example with gold acrylic paint. Paint it.

Rub the paint away with a damp cloth.

Ready!

Here are some results on the white and black clay. On the white ones, the paint doesn 't look really good I think but I love the black ones. On the white ones, the paint just looks a bit dirty...
It obviously is best to use this technique with colored polymer and contrasting paint.

I made a little package with very thin metal wire. I twist the wire around a needle to create a tiny spiral.

I used chrochet thread to wrap double around the package.

You can also make it an ornament.

Wrap lots of chrochet thread around the package and add the clay label.

Only wrap thread around one edge and attach the clay gift tag.

In case you have a hard time getting the thin thread
through the little hole, here's a tiny trick that makes it super easy...
Cut a small piece of metal wire.

Fold the metal thread in half and put the thread in between.

Stick the metal thread through the little hole of the clay.

See how easy it is, you don't even need glasses for that! :)

I love the white, untreated gift tags best, they kind of look like porcelain clay...

There are lots of possibilities with this metal letter stamp set and I can't wait to use it for my ceramic work too. If you like to try it for yourself, don't hesitate and order a set of your own at EviesToolEmporium. I garantuee you lots of pleasure with it! :)
Michele from EviesToolEmporium also gave away a metal letterstamp set to a jewelry designer who used it to stamp metal. She made a little video montage and it's awesome, you can find that tutorial here.
If you like to receive all the gifttags that I made for making this tutorial, please leave a comment & you'll automatically enter this give-away. :) There's many more then you see in the pictures!
The winner will be announced next week.
Congrats Evylyn of Sumikoshop! I'll be sending out the gift tags soon! :)

Make sure to check out Totally tutorials on a regular basis for lots of fun DIY projects.